세계에서 가장 진보적인 솔라 EVA 제품디렉토리에 오신 것을 환영 합니다. 솔라모듈 생산업체는 저희의 솔라EVA 제품디렉토리에 필터를 사용하여 관한 지원을 받을 수 있습니다. 저희가 당신이 쉽게 셀을 비교할 수 있도록 전세계 솔라EVA 생산업체에서 데이터를 수집했습니다.
유형: | 빠른 치료 | 인장강도: | -- |
두께: | 0.2 ~ 0.8 mm | 열수축률 (길이 / MD) ≤: | 3 % |
지역: | 중국 |
Co-extrusion white poe film
Perc、topcon single/double glass photovoltaic module
Reduce white film spillage after component lamination
Low water vapor transmission rate
Reduce micro-cracks during cell lamination
High reflectivity retention
High weather resistance
유형: | 표준형 | 인장강도: | 25 MPa |
두께: | 0.30 ~ 0.80 mm | 열수축률 (길이 / MD) ≤: | 2 % |
지역: | 중국 |
유형: | 매우 빠른 치료 | 인장강도: | 16 MPa |
두께: | -- | 열수축률 (길이 / MD) ≤: | 3 % |
지역: | 중국 |
White EVA film (SV-15,297W)
Excellent weather resistance (including high temperature, high humidity, UV, etc.);
Excellent adhesion after ageing;
Low shrinkage, ensuring stable quality during lamination;
Excellent reflectance, which can significantly increase the power output of the module;
유형: | 빠른 치료 | 인장강도: | 9.5 MPa |
두께: | -- | 열수축률 (길이 / MD) ≤: | -- |
지역: | 한국 |
유형: | 빠른 치료 | 인장강도: | -- |
두께: | 0.2 ~ 0.8 mm | 열수축률 (길이 / MD) ≤: | 3 % |
지역: | 중국 |
Cross-linked poe encapsulation film
Has excellent water vapor barrier property and weather ability
Has better anti-pid performance and better peeling strength retention.
유형: | 빠른 치료 | 인장강도: | 21.5 MPa |
두께: | 0.45 ~ 0.50 mm | 열수축률 (길이 / MD) ≤: | 2 % |
지역: | 인도 |
유형: | 빠른 치료 | 인장강도: | 18 MPa |
두께: | 0.3 ~ 1 mm | 열수축률 (길이 / MD) ≤: | 3 % |
지역: | 중국 |
PO film (SE-556)
• Excellent weather resistance (including high temperature, high humidity, UV, etc.);
• Excellent adhesion after aging;
• Good maneuverability and stability during lamination;
• Excellent reflectance, which can significantly increase the power output of the module.
유형: | 빠른 치료 | 인장강도: | 16 MPa |
두께: | 0.30 ~ 0.80 mm | 열수축률 (길이 / MD) ≤: | 3 % |
지역: | 인도 |
유형: | 빠른 치료 | 인장강도: | 16 MPa |
두께: | 0.30 ~ 0.80 mm | 열수축률 (길이 / MD) ≤: | 3 % |
지역: | 인도 |
유형: | 빠른 치료 | 인장강도: | 18 MPa |
두께: | -- | 열수축률 (길이 / MD) ≤: | 3 % |
지역: | 중국 |