세계에서 가장 진보적인 솔라 EVA 제품디렉토리에 오신 것을 환영 합니다. 솔라모듈 생산업체는 저희의 솔라EVA 제품디렉토리에 필터를 사용하여 관한 지원을 받을 수 있습니다. 저희가 당신이 쉽게 셀을 비교할 수 있도록 전세계 솔라EVA 생산업체에서 데이터를 수집했습니다.
유형: | 빠른 치료 | 인장강도: | 60 MPa |
두께: | 0.45 ~ 1 mm | 열수축률 (길이 / MD) ≤: | 3 % |
지역: | 중국 |
High transparency and anti-PID
Low shrinkage, ensuring stable quality during lamination
Excellent adhesion between glass and different types of the back film
Excellent weather resistance (including high temperature, high humidity, and ultraviolet)
유형: | 빠른 치료 | 인장강도: | -- |
두께: | 0.53 ~ 0.63 mm | 열수축률 (길이 / MD) ≤: | 5 % |
지역: | 중국 |
유형: | 빠른 치료 | 인장강도: | 18 MPa |
두께: | 0.3 ~ 1 mm | 열수축률 (길이 / MD) ≤: | 3 % |
지역: | 중국 |
PO film (SE-556)
• Excellent weather resistance (including high temperature, high humidity, UV, etc.);
• Excellent adhesion after aging;
• Good maneuverability and stability during lamination;
• Excellent reflectance, which can significantly increase the power output of the module.
유형: | 매우 빠른 치료 | 인장강도: | 20 MPa |
두께: | 0.2 ~ 0.8 mm | 열수축률 (길이 / MD) ≤: | 3 % |
지역: | 중국 |
1. Z1,261 Extra Fast Cure within 10 mins
2. Over 25 Years Quality Assurance
3. Free of PID and Snail Trails
4. 15 Years Experience Technology Team
5. Excellent material compatibility with contact materials
유형: | 표준형 | 인장강도: | -- |
두께: | 0.45 ~ 0.55 mm | 열수축률 (길이 / MD) ≤: | -- |
지역: | 중국 |
유형: | 빠른 치료 | 인장강도: | 6 MPa |
두께: | 0.45 ~ 1 mm | 열수축률 (길이 / MD) ≤: | 3 % |
지역: | 중국 |
High transparency and anti-PID
Low shrinkage, ensuring stable quality during lamination
Excellent adhesion between glass and different types of the back film
Excellent weather resistance (including high temperature, high humidity, and ultraviolet)
유형: | 표준형 | 인장강도: | 25 MPa |
두께: | 0.38 ~ 0.76 mm | 열수축률 (길이 / MD) ≤: | 3 % |
지역: | 중국 |
유형: | 표준형 | 인장강도: | 25 MPa |
두께: | 0.38 ~ 0.76 mm | 열수축률 (길이 / MD) ≤: | 3 % |
지역: | 중국 |
유형: | 빠른 치료 | 인장강도: | -- |
두께: | 0.53 ~ 0.63 mm | 열수축률 (길이 / MD) ≤: | 5 % |
지역: | 중국 |
유형: | 빠른 치료 | 인장강도: | 25 MPa |
두께: | 0.38 ~ 0.46 mm | 열수축률 (길이 / MD) ≤: | 3 % |
지역: | 중국 |