태양광전지모듈 제품디렉토리
(12,358 패널 시리즈 / 46,175 패널)

• Elegant Full Black Design

• High-Efficiency TOPCon Technology

• Non-Destructive Cutting

• Bifacial Power Gain

• Lower BOS Cost & LCOE

• Up To 21.5% Peak Efficiency

• PID Resistant

• 30-Year Linear Power Output Warranty At 87.4%

• 15-Year Product Warranty

• Incorporates SMBB Technology with Half-Cut Topcon Cells

• Utilizes HOT 2.0 Technology for Improved Performance

• Demonstrates Outstanding Low-Light Performance

• Enhances Mechanical Load Tolerance

• Exhibits Resistance to PID

• TOPCon Technology

• Bifacial Power Gain

• Up To 22.44% Module Efficiency

• Higher Power Density

• SMBB Half-Cut Cells

• Enhanced Mechanical Load

• Rigorously Tested Under Stringent Conditions

• IP68 Certified

• 15-Year Product, 30-Year Linear Performance Warranty

• Utilize Bifacial Technology for Additional Energy Harvesting from the Rear Side

• Demonstrates Excellent PID Resistance

• Boasts an Industry-Leading Low Thermal Power Coefficient

• Module Imp Binning Significantly Reduces String Mismatch Losses

High-quality the YH450 module series

The series has 4 models with a maximum power output of 450W and a peak efficiency of 20.7%

Equipped with 144 half-cut solar cells

Resistant to potential induced degradation effects

Passed salt mist, ammonia corrosion, and electroluminescence tests

Durable design - an anodized aluminium alloy frame and a 3.2mm tempered glass

• M Busbar Solar Cell

• High Efficiency

• PID Resistance

• Low-light Performance

• Durability Against Extreme Environmental Conditions

• Advanced half-cut cells

• Bifacial power gains up to 15%

• Micro gap architecture

• Multi-busbars

• Lower internal resistance

• High mechanical load: 5,400 Pa snow, 2,400 wind loads

• 15-year product 30-year linear power output warranty

• The genuine manufacturing expert of TOPCon technology

• 4A1 high rating from Dun & Bradstreet

• The world famous third-party warranty, 12-year material warranty and 25-year power warranty

• Conversion efficiency can reach 21.29%

• The glass-glass solar module with mono half-cut cells is especially well-suited for extreme climatic conditions

• 30-year manufacturer's warranty

• 30-year performance guarantee

• PID reduction through glass/glass technology

• Enhanced module performance through Half-Cut technology and carefully selected materials

• 9BB multi-busbar technology for greater efficiency

• Half-cut cells for higher power output

• Less shading loss

• ISO 9,001, CE, TUV, and SGS certified

• 83% output retention even after 30 years of operation

• Features 132 mono half-cells, sturdy anodized aluminium frame, tempered-glass surface

• Endured rigorous testing, including withstanding 25 mm hailstones at speeds of 83 km/h

• Achieves an impressive maximum power output of 505 watts, boasting a module efficiency of up to 21.50%

• Harness the advantage of MBB half-cut technology for superior module efficiency

• Achieve excellent power generation performance

• Ensure long-term reliability with high-quality module construction

• Benefit from the ultra-hydrophilic self-cleaning coating technology for added value

• 10-30% Additional Power Generation

• ZERO LID (Light Induced Degradation)

• Higher Reliability

• Better Weak Illumination Response

• Better Temperature Coefficient

Equipped with 144 split cells in a single module - twice more compared to a conventional solar module

Each half-cut cell produces the same amount of voltage as a standard cell but only half of the current

Module reaches power of up to 455W with a maximum efficiency of 20.9%

Designed to withstand harsh environmental conditions - wind loads (2,400 Pa) and snow loads (5,400 Pa)

• Up To 21.7% High Efficiency

• Enhanced Power Output With Optimized Module Layout

• Superior Performance With Anti-LeTID, Anti-PID, And Hot-Spot Protect Technologies

• Certified For High Snow (5,400 Pa) And Wind Loads (3,000 Pa)

• Excellent Low-Light And Temperature Behavior For Consistent Energy Yield

• Zero LID

• Anti-PID

• Resistant to harsh environments

• Lower temperature coefficient(-0.29%/℃)

• Excellent low irradiance performance

• 80%-85% bifaciality and up to 30% power gain from the back side

• Lower BOS and LCOE

1.Power range from 660W to 700W

2.High conversion efficiency up to 21.68%

3.PERC technology

4.Anodized aluminium alloy frame

5.3.2-millimeter high-transmission tempered front glass

6.Highly resistant to PID effects12-year product warranty, 25-year linear power output warranty

The high module conversion efficiency of up to 21.27% by using innovative Half-cell design and multi-busbar (MBB) cell technology

Low-temperature coefficient and excellent performance under high temperatures and low light conditions

A robust aluminium frame ensures the modules withstand wind loads up to 2,400Pa and snow loads up to 5,400Pa

PID resistance

• 144 half-cut monocrystalline cells

• A conversion efficiency of up to 20.87%

• Equipped with 158.75mm cells, generate up to 420W

• A multi-busbar design with 9 busbars

• Stable power output is ensured by positive power sorting

• A 15 years product warranty and a 30-year linear power warranty