언어:
  1. 태양광전지모듈 제품디렉토리
  2. ASP-S1 (90-110W）
ASP-S1 (90-110W）
ASP-S1 (90-110W）
ASP-S1 (90-110W）
ASP-S1 (90-110W）

ASP-S1 (90-110W）

Advanced Solar Power (Hangzhou) Inc.
유형: 박막 (CdTe)
공율범위: 90 ~ 110 Wp
지역: 중국 중국
참고: 귀하의 문의가 Advanced Solar Power (Hangzhou) Inc.로 직접 발송이 될 것입니다.

제품 설명:

● EXCELLENT POWER GENERATION PERFORMANCE
● HIGH CONVERSION EFFICIENCY
● LOW TEMPERATURE COEFFICIENT
● EXCELLENT LOW-IRRADIANCE EFFECT
● GOOD STABILITY：No intrinsic light-induced degradation effects.
● LOW HOT SPOT EFFECT
● MINIMAL BREAKAGE RATE
● EXCELLENT APPEARANCE：Fit best in buildings that have higher standards on appearance, unity and energy-independance.

제품특성

모델명
ASP-S1-90 ASP-S1-95 ASP-S1-100 ASP-S1-105 ASP-S1-110
보증  
제품보증연한 10 년
출력 보증 10년 동안 90% 이상의 효율, 25년 동안 80% 이상의 효율
전기적 특성 (STC)  
최대출력(Pmax)
90 Wp 95 Wp 100 Wp 105 Wp 110 Wp
최대전압(Vmpp)
96 V 98 V 98.5 V 98.5 V 98.5 V
최대전류(Impp)
0.94 A 0.97 A 1.02 A 1.07 A 1.12 A
개방전압(Voc)
122 V 122.5 V 123.5 V 123.5 V 123.5 V
단락전류(Isc)
1.06 A 1.09 A 1.13 A 1.2 A 1.25 A
  표준 테스트 조건(STC): AM 1.5, 방사조도 1000W/m2, 셀오돈 25°C
열 특성  
작동 온도 범위 -40~85 °C
온도 계수(Pmax) -0.214 %/°C
온도 계수(Voc) -0.321 %/°C
온도 계수(Isc) 0.060 %/°C
시스템 통합 파라미터  
최대 시스템 전압 1000 V
최대 역전류 2.0 A
퓨즈의 정격전류 2.0 A
기계적 특성  
모듈 외형 (H/W/D) 1200x600x6.8 mm
무게 12 kg
셀종류 박막(CdTe)
유리 유형 TCO, 저반사, 고투명, 더블 글라스 패널
유리의 두께 3.2 mm
봉합재 EVA
프레임 테두리 없음
정션박스 보호등급 IP 68
커넥터 유형 MC4
케이블 단면도 2.5 mm2
커넥터 케이블 길이 580 mm
인증
PDF  
제품 사양서 다운받기


Projects








Certificates



Advanced Solar Power (Hangzhou) Inc.

Click to show company phone
www.advsolarpower.com
중국
No. 801, Linyun Street, Economic Technology Development Zone, Hangzhou, Zhejiang
모회사: Advanced Solar Power (Hong Kong) Limited
참고: 귀하의 문의가 Advanced Solar Power (Hangzhou) Inc.로 직접 발송이 될 것입니다.

박막

생산량 (MW)/: MWp
CdTe: CdTe 비결정: 기타
공율범위(Wp): 80-110

패넬디자인혁신

생산량 (MW): --
지붕기와 및 지붕판, 기타, 투명 솔라셀
공율범위(Wp): 45-110

유용한 연락처

Contact Face
Kevin
Contact Face
Jenny
회사 설명
Our company (Advanced Solar Power (Hangzhou) Inc. here in after referred to as "ASP") provides standard CdTe thin film solar modules with relatively high efficiency and stability to the global market, and also offers the "turn-key" solutions on PV power station to its clients. Our products include CdTe thin film solar modules, BIPV modules, photovoltaic power stations and off-grid system turnkey services. They are clean and environment-friendly, with excellent power generation performance, excellent low-irradiance effect, high conversion efficiency, good stability, diversified customization scheme and elegant appearance.

Founded in 2008, ASP has been focusing on the research and development and production of CdTe thin film photovoltaic technology. After 12 years of development, we have established a perfect technology research and development system, realized the industrialization of CdTe thin film photovoltaic technology, and achieved the excellent level of battery efficiency at home and abroad. ASP has participated in and built many landmark projects, such as Sweden stereo garage color photovoltaic curtain wall, UK photovoltaic bus station, China Pavilion of the Expo 2019 in Beijing China, Datong Energy Museum of Shanxi Province, China. Products are exported to Europe, Australia, Southeast Asia and more than 40 countries and regions, with rich technology research and development, engineering practice experience and new energy technology comprehensive service capabilities.

ASP is willing to further strengthen cooperation with partners who are interested in providing the most affordable PV power solutions to the world by using CdTe thin film photovoltaic technology, we are strive to build a resource-saving and environment-friendly world!
비즈니스 상세 정보
박막
CdTe: CdTe
BIPV: BIPV
비결정: 기타
공율범위(Wp): 80-110
패넬디자인혁신
유형: 지붕기와 및 지붕판, 기타, 투명 솔라셀
공율범위(Wp): 45-110
모회사
Advanced Solar Power (Hong Kong) Limited
제품 동영상
ASP-S1 (90-110W） 솔라패널
제품

●  EXCELLENT POWER GENERATION PERFORMANCE

●  HIGH CONVERSION EFFICIENCY

●  LOW TEMPERATURE COEFFICIENT：The temperature coefficient of ASP CdTe thin film solar module is only about -0.21%/℃, as the traditional silicon solar module temperature coefficient reaches to -0.48%/℃. 

●  EXCELLENT LOW-IRRADIANCE EFFEC

●  GOOD STABILITY：No intrinsic light-induced degradation effects.

●  LOW HOT SPOT EFFECT

●  MINIMAL BREAKAGE RATE

●  EXCELLENT APPEARANCE：Fit best in buildings that have higher standards on appearance, unity and energy-independance.

●  CUSTOMIZATION：The colors, dimensions and transparency of the modules can be customized to meet the needs of different customers. It not only meets the functional requirements of photovoltaic power generation, but also takes into account the basic functions and aesthetic requirements of the building.

●  GREEN ENERGY AND ENVIRONMENTAL PROTECTION：The installation of photovoltaic modules can achieve energy conservation, emission reduction, environmental protection, and reduction of pollution, providing people with healthy, applicable and efficient use of space, coexisting in harmony with nature. Taking the installation of 100m2 cadmium telluride thin-film photovoltaic modules in Beijing as an example, the total installed capacity is about 10KW, and a total of 103.1 tons of coal will be saved in 25 years, 70.11 tons of dust and 268.06 tons of carbon dioxide will be reduced. According to a tree in the absorption of 18.3 kg of carbon dioxide to calculate, it is equivalent to planting 600 trees per year and about 15,000 trees in 25 years. It has great value of environmental protection and benefits the society.




Projects




Events


Certificates



Advanced Solar Power (Hangzhou) Inc.의 다른 11시리즈

  • ASP-ST1（57-85...
    57~85 Wp 박막
  • ASP-S2（80-90）
    80~90 Wp 박막
  • ASP-SMALL
    0.23~2.56 Wp 박막
  • ASP-IMAR-T0
    42 Wp 박막
  • ASP-PV-TILE-45
    45 Wp 박막
  • ASP-IAL-T0
    47~66 Wp 박막
  • ASP-LAM2（57-8...
    57~85 Wp 박막
  • ASP-INS（57-76...
    57~76 Wp 박막
  • ASP-S4-85
    85 Wp 박막
  • ASP-PV-TILE-94
    94 Wp 박막
  • ASP-LAM3（164-...
    164~218 Wp 박막