태양광전지모듈 제품디렉토리
(12,510 패널 시리즈 / 46,691 패널)

• 144 high-quality monocrystalline cells

• A conversion efficiency rating of up to 22.45%

• A total power output range of 570-to-580-watt peak

• Up to 5W positive power output tolerance

• An anodized aluminium alloy and a 3.2mm thick glass

• A 15-year product and 30-year performance warranty

• Bloomberg Tier 1 Brand

• N-Type TOPCon Technology

• Bifacial Power GainUp To 22.47% Module Efficiency

• LID And PID Resistant

• High-Quality Materials, Best Workmanship, German Engineering

• 30-year Linear Performance, 15-year Product Warranty

• Positive Power Tolerance (0~+5W) Guaranteed

• High Module Conversion Efficiency (up to 22.64%)

• Complete System and Product Certifications

• Solid PID Resistance

• Reduced Resistive Loss With Decreased Operating Current

• High Energy Yield With Lower Operating Temperature

• 10-30% Additional Power Generation

• ZERO LID (Light Induced Degradation)

• Higher Reliability

• Better Weak Illumination Response

• Better Temperature Coefficient

Using high efficiency TOPCON solar cells.

30 years product warranty

glass glass full black

+80% Bifaciality

lower temp. coefficiënt.

more output at lower light conditions compared to PERC.

100% inspection, to guarantee the reliability of solar systems.

Anti LID & Anti PID.

Quality RFID Tracking.

UL certified till 430W

• The genuine manufacturing expert of TOPCon technology

• 4A1 high rating from Dun & Bradstreet

• The world famous third-party warranty, 12-year material warranty and 25-year power warranty

• Conversion efficiency can reach 21.29%

Equipped with 144 split cells in a single module - twice more compared to a conventional solar module

Each half-cut cell produces the same amount of voltage as a standard cell but only half of the current

Module reaches power of up to 455W with a maximum efficiency of 20.9%

Designed to withstand harsh environmental conditions - wind loads (2,400 Pa) and snow loads (5,400 Pa)

• Bifacial technology enables additional energy harvesting

• 30 years lifespan brings 10-30% additional power generation

• The N-type solar cell has no LID

• Excellent low irradiance performance

• Better light trapping

• Industry-leading lowest thermal co-efficient

• Excellent Cells Efficiency

• Bifacial Technology

• Anti-PID

• Better Weak Illumination Response

• Excellent Quality Management System

• MBB PERC half-cut cell technology

• Anti-PID capabilities

• Outstanding performance in low-light conditions

• Increased mechanical load capacity

• Exceptional reliability

• Tier 1 Quality Panel

• Proven Half-Cut PERC Cells

• Advanced Multi-Wire Technology

• Up To 21.3% Peak Efficiency

• PID Resistant

• 25-Year Linear Power Output Warranty At 84.8%

• 12-Year Materials And Workmanship Warranty

• Integrates Advanced 210-millimetre Cells

• Achieving An Impressive 670w Power Output

• Space And Cost Efficiency

• The Half-cut Design

• High-density Encapsulation Technology

• Robust And Reliable

• Efficient Shipping - 31 Pieces Per Pallet And 558 Pieces Per 40-foot-high Cube Container

• Achieves an impressive efficiency of up to 21.50%

• Positive power tolerance ranging from 0 to +5W

• Robust Load Capacity

• Complies with international QS ISO9,001 standards

• Enhanced Weatherproofing

• Resilient Against Salt and Corrosion

• Anti-PID Technology

• Exceptional Performance in low-light conditions

• Exceptional PID Resistance

• Industry-Leading Low Thermal Power Coefficient

• Module Imp Binning Greatly Reduces String Mismatch Losses

• Cutting-edge Half-cut PERC Cells

• Maximum efficiency of 21.06%

• Exceptional Anti-PID Performance

• Easy to Install

• Junction Box Protected with IP68

• Optimal Choice for Ultra-large Power Plants

• ZERO LID

• PID Resistance

• Durability Against Extreme Environmental Conditions

• More Outstanding Low-Light Performance

• Enhanced Mechanical Load

• EL Full Inspection

• Rigorous quality control meeting the highest international standards

• High-transmittance low-iron tempered glass, strong aluminum frame using UV-resistant silicon

• ISO 9,001:2,008, ISO 14,001:2,004, OHSAS 18,001

• IEC 61,215, IEC 61,730, safety class II, conformity to CE