세계에서 가장 진보적인 솔라 EVA 제품디렉토리에 오신 것을 환영 합니다. 솔라모듈 생산업체는 저희의 솔라EVA 제품디렉토리에 필터를 사용하여 관한 지원을 받을 수 있습니다. 저희가 당신이 쉽게 셀을 비교할 수 있도록 전세계 솔라EVA 생산업체에서 데이터를 수집했습니다.
유형: | 매우 빠른 치료 | 인장강도: | -- |
두께: | -- | 열수축률 (길이 / MD) ≤: | 3 % |
지역: | 태국 |
유형: | 표준형 | 인장강도: | -- |
두께: | -- | 열수축률 (길이 / MD) ≤: | -- |
지역: | 중국 |
3M white film, High reflectivity helps increasing power efficiency especially for single glass & double glass module. Meanwhile, it plays an important role in improving the module CTM, increasing the power output, especially for double glass modules.
유형: | 빠른 치료 | 인장강도: | 20 MPa |
두께: | 0.20 ~ 0.30 mm | 열수축률 (길이 / MD) ≤: | 5 % |
지역: | 중국 |
유형: | 빠른 치료 | 인장강도: | 18 MPa |
두께: | 0.2 ~ 0.8 mm | 열수축률 (길이 / MD) ≤: | 3 % |
지역: | 중국 |
Thermoplastic adhesive film tpo
Has the advantages of low packaging temperature and low water vapor transmission rate
Maintains excellent weather resistance and good adhesion
Can be widely used for the packaging of perovskite batteries and thin film battery modules
유형: | 매우 빠른 치료 | 인장강도: | 18 MPa |
두께: | 0.45 ~ 0.75 mm | 열수축률 (길이 / MD) ≤: | 3 % |
지역: | 중국 |
WHITE EVA II FILM (SV-15,297W)
Excellent durability (including high resistance to temperature, humidity and UV)
Transparent EVA on the cell face and white EVA on the back
Can be used for G-to-G solar modules, normal solar modules and thin-film solar modules
유형: | 빠른 치료 | 인장강도: | 10 MPa |
두께: | 0.2 ~ 0.8 mm | 열수축률 (길이 / MD) ≤: | 3 % |
지역: | 중국 |
Thermoplastic tpo adhesive film
Has the advantages of low packaging temperature and low water vapor transmission rate
Maintains excellent weather resistance and good adhesion
Suitable for perovskite, cigs, lightweight components.
유형: | 빠른 치료 | 인장강도: | -- |
두께: | 0.2 ~ 0.8 mm | 열수축률 (길이 / MD) ≤: | 3 % |
지역: | 중국 |
Ultra-low pre-crosslinking white adhesive film for high barrier packages
Hjt、perc、topcon single glass photovoltaic module
유형: | 빠른 치료 | 인장강도: | 10 MPa |
두께: | 0.65 ~ 0.6 mm | 열수축률 (길이 / MD) ≤: | 2 % |
지역: | 인도 |